![background image](http://html1.mh-extra.com/html/carrier/telink/telink_overview-and-setup-manual_2563790020.webp)
9
The user configures TeLINK by means of the following tables:
Alarm Processing Definition Table
Controller Identification Table
Modem Configuration Table
Monitoring Center Definition Table
TeLINK Configuration Table
Occupancy Table
The user configures these tables from a ComfortWORKS, the
Building Supervisor, or a Network Service Tool.
For descriptions of the decisions in each table, refer to the Configu-
ration section. The purpose of each table is summarized on the
following pages.
The Alarm Processing Definition Table (ALARMDEF) contains
decisions used to specify the following:
•
Conditions that will enable alarm processing
•
Whether automatic diagnostics are enabled
•
Building number and customer code
The Automatic Diagnostic Self-Health Check function is triggered
by the Diagnostic Alert Target Hour configuration entry. If the
value entered is 0 then this function is disabled. Otherwise, the
function will run automatically once a day. This function initiates
an alarm call to the occupied monitoring center to enable monitoring
center personnel to confirm that the remote site is active. The entry
in this decision establishes a time range for this alarm to occur,
which will happen at a random time up to 255 minutes before the
targeted hour.
Example
If the target hour is 9:00 am, the alarm will occur each day between
4:45 am and 9:00 am.
Example
If the hour is 2:00 am, the alarm will occur each day between
midnight and 2:00 am.
TeLINK
Configuration
Tables
Alarm Processing
Definition Table
Summary of Contents for TeLINK
