DPM III xi series
Function Menu
04.18
Operating manual
51
7.9 Interface
Press key
to access the function menu.
Press key
as long as you arrive at the 'Interface' menu.
Press key
to select the menu.
COM1:
0 - serial interface Off.
1 - serial interface On.
2 - serial Interface On, no error message occurs in case of a
transmission error.
Baud rate:
Indication of bits which are transferred per second.
Following values are possible: 1200, 2400, 4800, 9600, 19200.
P = Parity:
N - No parity; E - Even; O - Odd
Please observe that the settings correspond to those of the direct print
module.
D = Data bits:
Setting of data bits.
Value range: 7 or 8 Bits.
S = Stop bits:
Indication of stop bits between bytes.
Value range: 1 or 2 stop bits.
Press key
to arrive at the next menu item.
SOH:
Start of data transfer block
Hex format 01
ETB:
End of data transfer block
Hex formal 17
Two different start / en signs can be set. The settings are normally
SOH = 01 HEX and ETB = 17 HEX. Several host computers cannot
process these signs and therefore SOH = 5E HEX and ETB = 5F
cannot be set.
Press key
to arrive at the next menu item.
Data memory:
Standard:
After starting a print order the direct print module buffer
receives data as long as it is filled.
Advanced:
During a current print order data is received and
processed.
Off:
After starting a print order no more data is received.
Press key
to arrive at the next menu item.
Parallel port:
SPP - Standard Parallel Port
ECP - Extended Capabilities Port (enables a fast data transmission
but it is only to set at PCs of newer version).
Observe that the settings correspond to those of the PC.
Summary of Contents for DPM III XI
