Carl Valentin DPM III XI Page 31 Operating Manual Download

Page: 31 / 96

DPM III xi series

Installation and Initiation

04.18

Operating manual

5.4 Connecting the Direct Print Module

The direct print module is equipped with a versatile power supply unit.
The device may be operated with a mains voltage of 230 V / 50

…60

Hz without any adjustments or modifications.

CAUTION!

The direct print module can be damaged by undefined
switch-on currents.



Set de power switch to '0' before plugging in the direct
print module.



Insert power cable into power connection socket.



Insert plug of power cable into a grounded electrical outlet.

NOTICE!

Insufficient or missing grounding can cause faults during
operation.

Ensure that all computers and connection cables connected to
the direct print module are grounded.



Connect direct print module to computer or network with a
suitable cable.

5.5 Before Initial Operation



Mount print mechanics.



Connect all cables between print mechanics and control unit.



Protect cables against unintentional unscrewing.



Connect compressed air line.



Connect control unit and PC by printer interface.



Connect control unit and packaging machine by inputs and
outputs.



Connect power cable of control unit.

Connecting to the
power supply

Connecting to a
computer or to a
computer network

Summary of Contents for DPM III XI

































































































Search results

Summary of Contents for DPM III XI

Reviews:

Related manuals for DPM III XI

Brands by name

Popular brands

Carl Valentin DPM III XI, Operating Manual

Search results

Summary of Contents for DPM III XI

Reviews:

Related manuals for DPM III XI

Brands by name

Popular brands