Carl Valentin DPM III XI, Operating Manual

Page: 44 / 96

Function Menu DPM III xi series
44 Operating manual 04.18
Press key to arrive at the next menu item.
Ribbon speed:
Indication of ribbon speed in %.
In this mode it is possible to set the ribbon speed relative to the print
speed. Because of a less speed of the ribbon you can reduce the
consumption of ribbon. Reducing the ribbon speed can lead to an
inferior print quality.
The setting range of the ribbon speed is between 50% and 100%.
The example shows the consumption of transfer ribbon in
dependence of the ribbon speed.
Service position:
Indication of position in 1/10 mm steps in which the print unit can be
moved in times of service. In the main menu click key to move the
print unit in service position. Press key to move the print unit again
to zero point of machine.
Press key to arrive at the next menu item.
Brake:
In case the DPM III is installed in vertical position, the option brake
should be available and set to On. Is the DPM III installed in horizontal
or in variable position the option brake (if available) should be set to
Off to avoid deceleration during printing.
Delay:
Indication of delay in 1/100 seconds. By means of this parameter it is
possible to delay the closure of brake. If during the delay time no start
impulse for printing a new cycle is effected, then the brake is closed. If
the delay time is set to 0, the brake is closed immediate after return to
zero point of machine.