Carl Valentin DPM III XI, Operating Manual

Page: 43 / 96

DPM III xi series Function Menu
04.18 Operating manual 43
Press key to arrive at the next menu item.
Back-Speed:
Indication of back speed of the print mechanics after print end in
mm/s.
Each cycle of the machine consists of printing and return to the zero
point of machine. It is possible to set the print speed and back speed
separately. The setting range for the back speed is between 50 and
500 mm/s.
Because of this value you can select for low machine clock cycles an
operating method which saves the material and increases in this way
the life of the printhead.
Because of the mass moment of inertia it could be better to reduce the
speed at an installation position of the print unit at >30° horizontal.
Value range: 50
…500 mm/s.
Press key to arrive at the next menu item.
Print offset:
Indication of distance of the layout (res. the first layout in case more
layouts per cycles are to be printed) to the zero point of machine.
Value range: 0
…93 mm
Default: 0 mm
Press key to arrive at the next menu item.
Layouts/cycle:
Indication of the number of printed layouts per print start (cycle).
Value range: 1
…25.