Carl Valentin DPM III XI, Operating Manual

Page: 87 / 96

DPM III xi series Additional Information
04.18 Operating manual 87
In case at switching off the direct print module a print order was
active, then a print start is released automatically and the required res.
actual number of printed layouts is refreshed.
In case the print order was stopped at switching off the direct print
module, it is again set to the stopped mode after switching on the
direct print module anew.
In case a customized entry was active during switching off the direct
print module, the window for the first customized variable is displayed.
As in the intended file only the start values of the counter are saved,
they are refreshed at a new start of the print order by means of the
number of printed layouts. Each counter is counted corresponding
from its start value. Afterwards the position of the current and the next
counter update are correctly set by means of the update intervals.
NOTICE!
Make sure that in case graphics are onto the layout they have
to be saved onto Compact Flash card.
Starting the print order
Refreshing the
variable counter