Cargo Floor CF 500 SL-21-112, Assembly Instructions Manual

Page: 69 / 110

Cargo Floor B.V.
P.O. Box 271
NL-7740 AG Coevorden
Phone: +31-(0)524-
593900
Fax: +31-(0)524- 593999
Blz. 68
©
2006 Cargo Floor B.V. Coevorden, Holland
Versie 01/01-06-2006
www.cargofloor.nl
info@cargofloor.nl
MAINTENANCE INSTRUCTIONS
Check after receipt of the new trailer:
Check the join between the aluminium floor profiles and the Cargo Floor-system. If there is play then
either tighten the bolts or replace them. Check this a couple of days after receipt of the trailer, after 10
loads / unloads and after one month.
Specifications of the screws:
M12 x 25 countersunk screws with hexagon socket, class 10.9, galvanized. DIN 7991
Loctite must be applied to the threaded surfaces of the bolts (Loctite® 243 cat. o. 23286 thread locking).
A torque of 100 – 140 Nm should be used to tighten the bolts.
Regular checks:
To ensure that your Cargo Floor system operates reliably and has a long life, it is important that you
regularly perform careful checks on the following aspects:
- The quality of the oil; this must be cleaned regularly (check every ½ year)
- Replace the filter element every year;
- Change the oil every 2 years, or more frequently if required;
- The level of oil in the tank. The oil should be kept at a level of at least 150 litres to prevent
overheating. Use a good quality, hydraulic oil in accordance with the ISO VG 32 norm.
Check and, if necessary clean the following components:
- Screws/bolts: are they still tight, tighten or replace if necessary!
- Check the ducts and joints of all hydraulic components, and adjust if necessary!
- Oil
tank;
By taking the lid off the tank, you can remove any remains (condensation, dirt etc.) from the bottom.
- Return-/pressure filter
You can check the filter elements or replace. You gain access by removing the filter lid/ chamber.
This is all necessary to avoid internal wear (of the pump/cylinders etc., for example).
New filter parts are available at your system builder. For the right type we refer you to our “exploded
views” which you can find on our website: www.cargofloor.nl/download.
We want to emphasize that the minimal costs of replacing dirty parts or oil do not match the costs and
discomfort that can proceed out of this.
- Circulation
valve;
Adjustment of the circulation valve. It is important that the circulation valve is correctly adjusted and
that the switchover moment occurs according to the procedures. See page 21.
Cleaning the floor parts with a steam cleaner is also part of the regular preventative maintenance.