45
Installing the X-Axis Drag Chain
1.
Reach over the X-rail and lift the X-Axis drag chain.
Lay it flat along the length of the X-rail with the
head near the Y2-carriage curling upwards. See
Figure 6-15
.
2.
Curl the head of
the drag chain up and towards
the Z-Plus and rest it on top of the X-Axis drag
chain head bracket. See
Figure 6-15
.
3.
Use the 2mm hex key and two (2) M3x4mm flat
head screws to secure the X-Axis drag chain to
the head bracket. See
Figure 6-15
.
4.
Use the 2mm hex key and one (1) M3x4mm flat
head screw to attach the tail of the drag chain to
the single PEM nut in the tail bracket. Use the
center through-hole closest to the end of the drag
chain. See
Figure 6-16
.
Figure 6-15
Figure 6-16
Summary of Contents for SHAPEOKO XXL
