59
Required Components
See
Figure 10-2
:
Item
Description
Location
Qty
A
Compact Router
Wiring Harness Box
1
B
Cable Ties
Wiring Harness Box
6\8
C
#201 ¼-inch Square End Mill Cutter
XXL Final Assembly Box
1
D
Sweepy Dust Boot
Sweepy Box
1
Required Tools
See
Figure 10
-
3
:
Item
Description
Qty
A
4mm Hex Key
1
B
Cut Pliers or Scissors (not included)
1
C
13mm Wrench*
1
D
22mm Wrench*
1
*Found in the Carbide Compact Router box.
Install the Carbide Compact
The Z-Plus supports routers with a diameter of 65mm and
69mm.
Following are the installation steps for our 65mm Carbide
Compact Router. 65mm routers require the use of the
included router mount adapter ring, which we installed in
a previous step. In a previous step we also lowered the
Z-carriage on the front of the Z-Plus to its lowest point.
1.
Use the 4mm hex key to loosen the two (2)
M5x55mm socket head cap screws on the front of
the router mount
2.
Insert the router into the mount until the taper of
the router’s body meets the adapter ring. Ensure
the power cord extends to the right. See
Figure 10
-
4
.
Figure 10-3
Figure 10-4
Summary of Contents for SHAPEOKO XXL
