CapstanAG PinPoint III ENVELOP, Operator'S Manual

Page: 97 / 128

TM
Troubleshooting
Fault Code
and Message
Fault Cause Correction
Fault 97:
Section 6 Low
Pressure Section 6 Low
Pressure If you are using sectional
pressure sensors, this
means the section is below
the minimum voltage for the
pressure sensor. Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
Fault 98:
Section 7 Low
Pressure Section 7 Low
Pressure If you are using sectional
pressure sensors, this
means the section is below
the minimum voltage for the
pressure sensor. Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
Fault 99:
Section 8 Low
Pressure Section 8 Low
Pressure If you are using sectional
pressure sensors, this
means the section is below
the minimum voltage for the
pressure sensor. Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
Fault 100:
Section 1 High
Pressure Section 1 High
Pressure If you are using sectional
pressure sensors, this
means the section is above
the maximum voltage for
the pressure sensor Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
Fault 101:
Section 2 High
Pressure Section 2 High
Pressure If you are using sectional
pressure sensors, this
means the section is above
the maximum voltage for
the pressure sensor Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
Fault 102:
Section 3 High
Pressure Section 3 High
Pressure If you are using sectional
pressure sensors, this
means the section is above
the maximum voltage for
the pressure sensor Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
Fault 103:
Section 4 High
Pressure Section 4 High
Pressure If you are using sectional
pressure sensors, this
means the section is above
the maximum voltage for
the pressure sensor Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
Fault 104:
Section 5 High
Pressure Section 5 High
Pressure If you are using sectional
pressure sensors, this
means the section is above
the maximum voltage for
the pressure sensor Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
Fault 105:
Section 6 High
Pressure Section 6 High
Pressure If you are using sectional
pressure sensors, this
means the section is above
the maximum voltage for
the pressure sensor Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
©
2021 Capstan Ag Systems, Inc.
97
PinPoint
™
III ENVELOP