CapstanAG PinPoint III ENVELOP, Operator'S Manual

Page: 47 / 128

TM
Operation
Flowmeter Setup
Line Title Line
Number
Description
The calibration value must match the tag on the flowmeter or a catch test.
Meter 1 Error Limit 4
The flowmeter error limit ranges from Disabled to 50%. Flow % higher than the chosen %
will cause a fault message and an alarm.
Specific Gravity 1 5
Specific gravity refers to the density or weight per gallon as compared to water (Water =
8.35 lb./gal.). For water-based products, use 1.00. For liquid fertilizer, use 1.2 for 10 lb/gal
product, etc. Specific gravity is used to calculate flow.
Meter 2 Type
Type of fill or second flowmeter used on your machine.
Transparent The flow signal from the flowmeter will be used without any adjustment.
Correction At flows above the minimum, the signal from the flowmeter is used, but
adjusted with calculations for turn compensation and individual nozzle
shutoff.
At flows below the minimum, the value is calculated.
Calculation All flow is calculated, the flowmeter is not used.
NH3
Calculation
All flow is calculated, the flowmeter is not used. The calculations are
corrected for the properties of NH3.
NH3
Correction
At flows above the minimum, the signal from the flowmeter is used, but
adjusted with calculations for turn compensation and individual nozzle
shutoff.
At flows below the minimum, the value is calculated.
The calculations are corrected for the properties of NH3.
6
Flow Signal
Out
Flow signal out is used to send a signal to an external rate controller.
Meter 2 Minimum 7
The flowmeter minimum value is the minimum flow at which the flowmeter is accurate.
Meter 2 Calibration 8
The calibration value must match the tag on the flowmeter or a catch test.
9 Meter 2 Error Limit
©
2021 Capstan Ag Systems, Inc.
47
PinPoint
™
III ENVELOP