CapstanAG PinPoint III ENVELOP, Operator'S Manual

Page: 43 / 128

TM
Operation
Pump Setup
Line Title Line
Number
Description
Pump Max. Speed 7
The pump maximum speed is used on sprayers that are equipped with a pump speed
sensor. When the pump speed limit is enabled, it will limit the maximum pump speed to the
selected RPM.
Rx Method
Minimum The target pressure corresponds to the minimum prescription pressure for
the boom.
Maximum The target pressure corresponds to the maximum prescription pressure for
the boom.
8
Average This is the default setting. The target pressure corresponds to the average
prescription pressure of the boom.
Max Pressure 9
If a maximum pressure is set, the system will not exceed this value.
Max Flow 10
If a maximum flow is set, the system will not exceed this flow.
Default 11
Change the default start-up operation of the pump. Set to Off, and the pump will always
be off when the machine is started and the pump must be started from the VT display. Set
to Last, and the pump will be in the same mode as when the machine was turned of. So
if the pump was on when the machine was turned off, then when the machine is started
again, the pump will be on.
Recirculation
If the system has a recirculation system select the desired operation mode and an icon will
show on the run screen. Disable this feature if there is not a recirculation system on the
machine.
Manual In Manual mode, select the recirculation icon to turn the system on and off.
Auto In Auto mode, select the recirculation icon to start the system the first time.
After the initial start, the machine will operate the recirculation system as
needed.
12
Auto Delay
30s In Auto Delay 30s, select the recirculation icon to start the system the first
time. After the initial start, the machine will operate the recirculation system
as needed and will wait 30 seconds after you stopped spraying to turn the
system back on. This is the recommended operation mode if your machine
has a recirculation system.
Recirculation Valve 13
Select the type of recirculation valve the system has.
14 Cycle Boom Valves
©
2021 Capstan Ag Systems, Inc.
43
PinPoint
™
III ENVELOP