CapstanAG PinPoint III ENVELOP, Operator'S Manual

Page: 96 / 128

TM
Troubleshooting
Fault Code
and Message
Fault Cause Correction
Damaged harness Do a check of the harnesses and
connections, repair or replace as
necessary
Internal hub problem Contact CapstanAG to repair or
replace the hub.
Fault 89:
Section 6 Valve
Open Circuit Section 6 Valve
Open Circuit
Servo valve failure Repair or replace the servo valve
Damaged harness Do a check of the harnesses and
connections, repair or replace as
necessary
Internal hub problem Contact CapstanAG to repair or
replace the hub.
Fault 90:
Section 7 Valve
Open Circuit Section 7 Valve
Open Circuit
Servo valve failure Repair or replace the servo valve
Damaged harness Do a check of the harnesses and
connections, repair or replace as
necessary
Internal hub problem Contact CapstanAG to repair or
replace the hub.
Fault 91:
Section 8 Valve
Open Circuit Section 8 Valve
Open Circuit
Servo valve failure Repair or replace the servo valve
Fault 92:
Section 1 Low
Pressure Section 1 Low
Pressure If you are using sectional
pressure sensors, this
means the section is below
the minimum voltage for the
pressure sensor. Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
Fault 93:
Section 2 Low
Pressure Section 2 Low
Pressure If you are using sectional
pressure sensors, this
means the section is below
the minimum voltage for the
pressure sensor. Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
Fault 94:
Section 3 Low
Pressure Section 3 Low
Pressure If you are using sectional
pressure sensors, this
means the section is below
the minimum voltage for the
pressure sensor. Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
Fault 95:
Section 4 Low
Pressure Section 4 Low
Pressure If you are using sectional
pressure sensors, this
means the section is below
the minimum voltage for the
pressure sensor. Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
Fault 96:
Section 5 Low
Pressure Section 5 Low
Pressure If you are using sectional
pressure sensors, this
means the section is below
the minimum voltage for the
pressure sensor. Do a check of the pressure
sensor, harnesses, and
connections, repair or replace as
necessary.
©
2021 Capstan Ag Systems, Inc.
96
PinPoint
™
III ENVELOP