CapstanAG PinPoint III ENVELOP, Operator'S Manual

Page: 54 / 128

TM
Operation
Configuration
Line Title Line
Number
Description
Synchro If in External Rate mode, the rate controller controls the pulsing
nozzles and the PinPoint
™
system controls the pump to a target
pressure.
If in Internal Rate or ISO mode, the PinPoint
™
system controls the
pulsing nozzles and the pump.
N-Ject The pulsing nozzles are used for rate control on fertilizer systems.
No Pulse Mode The PinPoint
™
valves are used for on/off functions. Rate is controlled
by pressure.
Valves Off The PinPoint
™
valves are off. Other nozzles are used for application.
Rate is controlled by pressure.
Product Mode
Single One product is applied.
Boost One product is applied with two valves at each location.
3
Dual Two products are applied.
Master Switch Source
None There is no master switch connected to the CapstanAG system.
External The master switch is wired to the hub.
4
On-Screen The master switch is shown on the VT display.
Configuration
Line Title Line
Number
Description
Boom Switch Source
None There is no boom switch connected to the system. Use this setting for CAN
boom switches.
5
External The boom switches are wired to the Gateway hub.
Aux Input Polarity 6
This setting allows for different polarity switches.
VT Update Rate 7
VT Update rate can be lowered for a virtual terminal (VT) that cannot handle enough data.
Display Smoothing 8
Actual rate and pressure are shown as on target if within 10%.
©
2021 Capstan Ag Systems, Inc.
54
PinPoint
™
III ENVELOP