CapstanAG PinPoint III ENVELOP, Operator'S Manual

Page: 33 / 128

TM
Initial System Setup
Key Fob Boom Shutoff Dry Test
Figure 22:
1. After doing the boom shutoff dry test, select the box (1) below System (2).
2. Select the box (3) next to Key Fob (4) until ON shows.
3. Turn on all of the boom section switches and the master switch.
Note: The CapstanAG Mobile App is available for iOS
2
and Android and is in both stores. You can
use the app as a key fob for this test procedure.
Figure 23:
4. Press the top/bottom buttons (1) on the key fob to turn on/off each boom section.
Make sure that each boom section is operating (clicking) in the correct order.
5. Press the right/left buttons (2) on the key fob to turn on/off each individual nozzle valve.
Make sure that each nozzle valve is operating (clicking) in the correct order.
6. Press the center button (3) on the key fob to turn off the whole boom.
7. On the VT screen, select the box (3) next to Key Fob (4) until OFF shows.
2
iOS is Trademarked by Cisco Systems and Apple licenses iOS.
©
2021 Capstan Ag Systems, Inc.
33
PinPoint
™
III ENVELOP