CapstanAG PinPoint III ENVELOP, Operator'S Manual

Page: 41 / 128

TM
Operation
Boom/Nozzle Settings Menu Descriptions
Nozzle Bounds
Line Title Line
Number
Description
Zero Speed Spray 1
This feature allows the system to apply product when the machine is not moving. Select
On to allow the system to spray when the machine is not moving. Select Off to make sure
that the system will not spray when the machine is stopped.
PWM Minimum % 2
This is the minimum pulse duty cycle for the nozzle valves. This value must not be lower
than the Nozzle Pulse Frequency.
PWM Maximum % 3
This is the limit of the maximum nozzle duty cycle.
Nozzle Pulse Frequency 4
CapstanAG systems run at 10 pulses per second pulse frequency. CapstanAG does not
recommend pulse frequencies slower than 10Hz in sprayer applications.
Low Press Shutoff 5
When enabled, this setting causes the solenoid valves to shut off, like diaphragm drip
checks at this value. When the low pressure shutoff value is 8 PSI, a message will show
when the pressure goes below 8 PSI. At this point, nozzle valves will close. Nozzle valves
will open, and the message will clear when the pressure increases to at least 12 PSI.
Valve Type
Solenoid valve type that the system uses for flow detection.
7W 7-watt Coil
12W 12-watt Coil
6
12WH 15-series valve with 12-watt coil and a heavy spring plunger
©
2021 Capstan Ag Systems, Inc.
41
PinPoint
™
III ENVELOP