manualshive.com logo in svg

Canon VK-16, Administrator'S Manual

Share
Download
Canon VK-16 Administrator'S Manual Download Page 86

86

Registering Camera Server

The 

Search Results 

dialog opens and a list of detected Camera Servers will appear.

When you initiate the Find Camera Servers function, your
computer searches the Viewer’s local subnet for all Camera
Servers connected to it. Camera Servers on another subnet
cannot be searched and must be added using Add Camera
Servers (

➝

P. 87).

The camera names listed are those specified by the Camera
Server. Refer to the Camera Server’s User’s Manual for more
information on setting the name (“Camera Name” for VB-C50i/
VB-C50iR, VB-C50FSi, VB-C50Fi, VB-C10/VB-C10R, “Device
Name” for VB150 and VB101, and “VB-C300NA” or “VB-
C300PA” for VB-C300).

Note

If you cannot find the Camera Server, click Add Camera Server
to add it.

For the Camera Servers which are already registered,
“Registered” is displayed in the “Register” column. The
“Register” columns for unregistered Camera Servers are
blank.

Tip

Summary of Contents for VK-16



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands