Canon VK-16, Administrator'S Manual

Page: 51 / 282

Stora
g
e
S
er
ver
Configuration
Ref
erence
Setting the Settings Tab
51
3
●
Enter the Storage Server Proxy Address
If the Storage Server needs to access
Camera Servers outside the LAN, you
may need to configure proxy settings.
* See “When using a proxy server” (
➝
P. 11).
In the Storage Server Proxy
field, tick the Enable the
following proxy server box.
Enter the Proxy server address
and Port .
For more information on proxy server usage, see your Camera Server administrator.
2
1
●
Enter Recorded Video Settings
Maximum retained history -
Check the Maximum retained
history option and enter a value
from 1 to 999 and then select
Days or Weeks from the drop-
down menu.
Maximum file size/duration - Check the Maximum file size/duration option, enter
a value (e.g., “100” or “24”), and select MB or Hours . You can enter 32 - 1024 for
MB and 1 - 24 for Hours . This will establish the maximum size used for each file of
recorded video. If you do not enter a value, 1024 MB or 24 hours is used for the
Maximum file size/duration value.
Low disk space warning level - Enter a percent value.
When the remaining space falls below the specified value, the event will be
displayed and a notification will be e-mailed (
➝
P. 62, 64).
Reduce recording frame rate when disk is under high load - When disk is highly
loaded, recording frame rate is temporarily reduced to prevent the recording from
stopped. Refer to Chapter 6 for details.
4
3
2
1
When Reduce recording frame rate when disk is under high load
is checked, you will receive an event notification such as
Effective “Recording rate (<recording rate before change>
➝
<recording rate after change> %)”.
Ex. “Recording rate (100.0
➝
90.0 %)”
Tip