Canon VK-16, Administrator'S Manual

Page: 65 / 282

65
3
Stora
g
e
S
er
ver
Configuration
Ref
erence
Setting the Event Notification Tab
Enter the host name or IP address
of the SMTP server in
SMTP Server
and port number in Port .
If you wan to use “POP-before-
SMTP” for user authentication,
check the
Use POP-before-SMTP
option, and enter the user name
used for authentication in
User
Name and password in Password .
Also, enter the host name or IP
address of the
POP server in POP
Server and port number in Port .
4
3
Example event notification e-mail
An event of priority 3 occurred on 12/05/2006 at 15:15:17 +1000.
Parking Lot 1: Sensor on
You can enter each of the subject, recipient’s address, and
sender’s address in up to 100 characters.
Note
Enter the host name in up to 255 characters.
Note
Enter the user name in up to 100 characters.
Enter the password in up to 20 characters.
Enter the host name in up to 255 characters.
Note
You can only register one e-mail address in the To Address field.
If you want to send the e-mail to multiple addresses, use a group
address.
Tip
If this is enabled, the Storage Server will attempt to perform a
POP login before sending e-mail that may be required for some
SMTP servers.
Tip