Canon VB-H610D Operation Manual Download Page 142

Page: 142 / 173

142

Recording to an SD Memory Card
Manually

Video displayed in the Admin Viewer can be manually

recorded to an SD memory card.

Note

• To record on an SD memory card, an SD memory card must be

inserted in the camera (p. 127) and [Save Logs and Videos]

must be selected in the setting page > [Memory Card] >
[Operation Settings].

• The size of the video recorded on the SD memory card

depends on the video size of the viewer. The video format

depends on the [Memory Card] setting page (p. 73).

Recording Videos Manually

The [Start/Stop SD Card Recording] button

appearance changes as shown below depending on

recording status.

Confirming Manually Recorded Video

Use the Recorded Video Utility (p. 116) to confirm video

manually recorded to an SD memory card.

Click the [Recorded Video Utility] button to start the

Recorded Video Utility from the Admin Viewer.

If you have not yet obtained the camera control
privileges, click the [Obtain/Release Camera Control]
button and obtain the control privileges.

Click the [

tart/

top

D Card Recording] button.

Not recording

Recording

To stop video recording, click the [

tart/

top

D Card

Recording] button again.

Summary of Contents for VB-H610D














































































































































































Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands

Canon VB-H610D, Operation Manual

Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands