Canon VB-H610D Operation Manual Download Page 102

Page: 102 / 173

102

Abandoned Object Detection

Detect objects that are carried in and abandoned for a certain amount of time. This function

can be used to detect objects that have been left.

Abandoned object detection is triggered when an object is left in the detection area for a

specified duration.

Object abandoned.

Background Image

Generated

Alert

Change in Designated Area

Analysis

Abandoned Object Detected

The object is abandoned
and detection begins
after set time.

Removed Object Detection

Detect objects that are being removed. This function can be used to detect actions such as

taking away valuables.

Removed object detection is triggered when an object is removed from the detection area

for a specified duration.

Picture has disappeared.

Background Image

Generated

Alert

Change in Designated Area

Analysis

Object Removal Detected

The picture (object) is
removed and detection
begins after set time.

Camera Tampering Detection

Detect when the capture is being obstructed. This function can be used to detect when the

camera orientation is changed or the image display is obstructed with spray, etc.

Camera tampering detection is triggered when an area exceeding the set area is

continuously altered by an object, etc.

Tampering detected.

Background Image

Generated

Alert

Video Area Changes

Analysis

Camera Tampering Detected

Detection begins when the
ratio of change in a video
exceeds a set amount.

Summary of Contents for VB-H610D














































































































































































Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands

Canon VB-H610D, Operation Manual

Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands