Canon VB-H610D Operation Manual Download Page 112

Page: 112 / 173

112

Note

Since changing [Detection Settings] restarts the intelligent

functions, detection will not be performed during the tens of
seconds that it takes to complete a restart.

Displaying Event Status

Click the [Event Display] button to open the event display

panel and confirm the detection status icon of the

intelligent functions.

This panel displays the same information as [Intelligent

Function (Image Detection)] in the event display panel of

the Admin Viewer. For details, see “Displaying Event

Status” (p. 141).

Note

If the detection setting is not stored in the camera, only the
detection status for the currently selected detection setting is

displayed.

elect [Reduce effects of lighting change].

Click [

ave settings].

Important

A [Reduce effects of lighting change] setting may not work
depending on the operating environment. Sudden changes in

brightness that persist may also have the same effect. Perform

a detection test to check what will work.

Summary of Contents for VB-H610D














































































































































































Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands

Canon VB-H610D, Operation Manual

Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands