Canon VB-H610D Operation Manual Download Page 120

Page: 120 / 173

120

This panel is used to adjust video from the camera that is

displayed by each Admin Tool. The panel is available to

the Privacy Mask Setting Tool, View Restriction Setting

Tool, Preset Setting Tool and Intelligent Function Setting

Tool.

Using Control for Admin

When you have obtained control privileges, click the

[Control for Admin] button to display the Control for Admin

Panel.

Opening/Closing Control Items

Clicking the title of a control item will open or close the

setting items.

You can open the various control items even without
obtaining the camera control privileges, but the items will
be grayed out.

Operating the Control Items

The panel operates in the same way as Control for Admin

of the Admin Viewer.

[

mart

hade Control]

You can set Smart Shade Control. For details, see “Setting

the Smart Shade Control” (p. 137).

[Focus]

You can adjust focus. For details, see “Setting the Focus”

(p. 137).

[Exposure]

You can adjust exposure. For details, see “Setting the

Exposure” (p. 138).

Note

The administrative control operations are not available if the
[Lock camera position] checkbox is selected (p. 105) when

intelligent functions are set.

Control for Admin

⇔

Summary of Contents for VB-H610D














































































































































































Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands

Canon VB-H610D, Operation Manual

Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands