Canon VB-H610D Operation Manual Download Page 135

Page: 135 / 173

135

min Viewer/

iewer

The operations and settings that can be performed only in the Admin Viewer are explained.

Transmitting Audio

In the Admin Viewer, you can transmit audio via an

external device connected to the camera.

Click this button to transmit audio.

Use the slider to set an appropriate volume on the Send

Audio panel that appears.

In the [Audio sending time limit], select [No Limit], [1

min(s)], [5 min(s)] or [10 min(s)].

Note

The first time the Send Audio panel is launched, a message to

install the add-on “Canon Network Camera Audio Receiver” will
be displayed in the information bar of the web browser. Install the

add-on.

Magnifying Part of the Image (Viewer
PTZ)

You can use the Viewer PTZ panel to magnify part of the

camera’s image in the image display area.

Viewer PTZ

Viewer PTZ uses the digital zoom function to enlarge part

of a video without using the camera pan, tilt or zoom

functions.

This function allows you to enlarge part of a video when

using the camera in a locked position, for example, during

use of an intelligent function.

Note

• The image display for the Viewer PTZ panel is subject to the

settings configured in [Maximum Number of Clients] and

[Maximum Connection Time (sec.)] under [Video Server] in the
Setting page. Therefore, depending on the settings, the image

may not display or will display for a certain amount of time only.

In such cases, see “The video is not displayed for Digital PTZ
panel in Admin Viewer.” and “The video is not updated in the

Digital PTZ panel in Admin Viewer.” under “Troubleshooting” in

“Chapter

, Append ix” (p. 149) and confirm the settings.

• Video cropped with Viewer PTZ will not be videos recorded

manually, or by event or timer.

• The cropped position in the image display area will be

reflected in full screen mode as well.

Opening the Viewer PTZ Panel

Click the [Viewer PTZ] button to display the viewer PTZ

panel.

The initial status of the Viewer PTZ panel shows the

preview frame (yellow) occupying the entire image.

Performing Operations and Settings in the Admin Viewer

Important

When the Viewer PTZ function is used, you cannot operate the

camera by clicking the image display area.

Preview Frame
(Magnified display area)

Center of preview
frame

Summary of Contents for VB-H610D














































































































































































Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands

Canon VB-H610D, Operation Manual

Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands