Canon VB-H610D Operation Manual Download

Page: 116 / 173

116

This utility manages video recorded on an SD memory card. It allows you to play back recorded video and download it to a

PC, display a video list or perform filtering.

Display Screens of Recorded Video Utility

(1) [Refresh Video List]

Update the video list to the current state.

(2) [Refresh Download

tatus]

Update video download status to the current state.

(3) [

D Card Details]

Displays the dialog box for details about the SD

memory card.

(4) [Number of Videos]

Displays the number of videos in the video list.

(5) [

elect All]

Select all video in the video list.

(6) [Export to mov format]

Export the [Downloaded] JPEG images selected in

the video list to a mov format video file.

(7) Video List

Displays a list of videos recorded on an SD memory

card and downloaded to a PC.

(8) [Delete from Camera]

Delete videos selected in the video list from the SD

memory card.

(9) [Download]

Download videos selected in the video list to a PC.

(10)[Download to]

Specify the folder that videos are downloaded to.

(11)[Filter]

Click [Filter] to open or close the filter area. Sets

criteria to narrow down the number of items displayed

in the video list (p. 117).

(12)[Playback Videos] Area

Plays videos selected in the video list (p. 118).

Recorded Video Utility

(1)

(11)

(7)

(10)

(9)

(8)

(5)

(6)

(4)

(2)

(3)

(12)

Summary of Contents for VB-H610D














































































































































































Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands

Canon VB-H610D, Operation Manual

Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands