Canon VB-H610D Operation Manual Download Page 134

Page: 134 / 173

134

Checking Information

The following icons will appear depending on the content

of the information displayed.

Note

For details on the messages, see “List of Viewer Messages”

(p. 159).

Icon (color)

Meaning

Description

(Blue)

Information

Appears when a camera
operation has been successful.
The following information
appears.
• Help messages, such for each

button and pull down menu

• Frame rate information

•

Pan, tilt, zoom camera

information, image
stabilization information

•

Pan, tilt, and

zoom information for Digital
PTZ

(Yellow)

Warning

A message will appear notifying
the user when camera control
privileges cannot be obtained,
audio reception stops, etc.

(Orange)

Error

Appears when a system error
occurs.

Important

If the image stabilizer function is turned on in the settings page
(p. 53), the actual viewing angle of the image will be smaller

than the viewing angle displayed in the information field (For

On1: approx. 83

; for On2: approx. 50

Also, the viewing angle of image display becomes smaller than

the angle (frame) displayed in the panorama display area.

Summary of Contents for VB-H610D














































































































































































Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands

Canon VB-H610D, Operation Manual

Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands