Canon VB-H610D Operation Manual Download Page 22

Page: 22 / 173

Enabling the Sound Function to Use Audio

In Windows Server 2008, the sound function is disabled

by default.

To receive audio with the Viewer, follow the steps below to

enable the sound function.

Note

If [Control Panel] is in the classic view, double-click [Sound].

Notes on Use with Windows Vista/
Windows 7

The following restrictions apply when the camera is used

with Windows Vista or Windows 7.

RM-Lite

For important information on the RM-Lite operating

environment, see the “Administrator Manual”.

Important

Note that when IE Enhanced Security Configuration is turned

back on, the [Do not save encrypted pages to disk] checkbox

also becomes enabled.

Open [Control Panel] and click [Hardware].

Click [

ound].

When the [Audio

ervice Not Running] message

appears, click [Yes].

The [

ound] dialog box appears.

Click the [Playback] tab to confirm that an audio device
has been installed. (If no audio device is installed, refer
to your PC manual.)

Summary of Contents for VB-H610D














































































































































































Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands

Canon VB-H610D, Operation Manual

Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands