Canon UFR II Driver Driver Manual Download Page 42

Page: 42 / 168

Installing the Software

2-22

ttin

Sta

rte

When the message box below appears after the files are copied,
connect the USB cable, and then turn the printer ON.

NOTE

If you are using Windows XP, select [Install Software Automatically (Recommended)] in the
dialog box displayed next

➞

click [Next].

Click [Exit] to finish the installation.

The printer icon is displayed in the [Printers] folder. The driver is now installed.

Plug and Play Installation (Windows 98)

Connect the cable from the printer's USB port to the PC's USB port,
and then turn the printer ON.

Start Windows, and then insert the Printer Driver Software CD-ROM
into the CD-ROM drive.

The Add New Hardware Wizard starts.

In the first dialog box of the Add New Hardware Wizard, click [Next].

Summary of Contents for UFR II Driver









































































































































































Search results

Summary of Contents for UFR II Driver

Reviews:

Related manuals for UFR II Driver

Brands by name

Popular brands

Canon UFR II Driver, Driver Manual

Search results

Summary of Contents for UFR II Driver

Reviews:

Related manuals for UFR II Driver

Brands by name

Popular brands