Canon UFR II Driver Driver Manual Download Page 19

Page: 19 / 168

System Requirements

1-5

System Requirements

The printer driver can be used in the following system environments:

■

Operating System Software

•

Microsoft Windows 98

•

Microsoft Windows Me

•

Microsoft Windows 2000

•

Microsoft Windows XP

•

Microsoft Windows Server 2003 (32 bit)

■

With a Server-Based Computing Environment

•

Compatible Windows Terminal Server (Service)
- Microsoft Windows 2000 Server
- Microsoft Windows Server 2003

•

Compatible Software
- Citrix MetaFrame XP
- Citrix MetaFrame 1.8
- Citrix MetaFrame Presentation Server 3.0
- Citrix Presentation Server 4.0

•

Compatible Microsoft Cluster Server (MSCS)
- Microsoft Windows 2000 Advanced Server
- Microsoft Windows Server 2003 Enterprise Edition

■

Computer

Any computer which runs the above operating system software properly

NOTE

•

The UFR II printer driver is available only for Windows 98, Windows Me, Windows 2000, Windows XP,
and Windows Server 2003. No other operating systems are supported.

•

Only the iR2016 and iR2020 are available for Windows 98 and Windows Me.

Summary of Contents for UFR II Driver









































































































































































Search results

Summary of Contents for UFR II Driver

Reviews:

Related manuals for UFR II Driver

Brands by name

Popular brands

Canon UFR II Driver, Driver Manual

Search results

Summary of Contents for UFR II Driver

Reviews:

Related manuals for UFR II Driver

Brands by name

Popular brands