Canon SmartBase MPC200 Basic Manual Download Page 91

Page: 91 / 108

Chapter 10

Troubleshooting

10-15

Troubleshooting

PROBLEM READING
CARD

The data on the memory card
may be inaccessible.

Check the data on the memory card in
your digital camera.

PUT IN CARTRIDGE

There is no printhead installed in
the machine.

Install the printhead.

Setup
Sheet

UNABLE TO PRINT ALL

In all frames or range frame
photo printing, not all the
photographs were printed.

Check which photographs were not
printed and try reprinting them.

Chapter 8

WAIT COOLING

During printing, the printhead
may have become too hot.

Allow the machine to cool down. The
machine will resume printing when it
has cooled down.

WASTED INK NEAR FULL The waste ink tank is nearly full.

If <CHECK PRINTER> then appears,

contact your local authorised Canon
dealer or the Canon help line.

WRONG CARTRIDGE

The printhead is not installed
correctly.

Try to reinstall the printhead. If the
message remains in the LCD, the
printhead may be defective. Contact
your local authorised Canon dealer or
the Canon help line.

Setup
Sheet

Message

Cause

Action

Details

Summary of Contents for SmartBase MPC200













































































































Search results

Summary of Contents for SmartBase MPC200

Reviews:

Related manuals for SmartBase MPC200

Brands by name

Popular brands

Canon SmartBase MPC200, Basic Manual

Search results

Summary of Contents for SmartBase MPC200

Reviews:

Related manuals for SmartBase MPC200

Brands by name

Popular brands