Canon SmartBase MPC200, Basic Manual

Page: 35 / 108

Chapter 5 Printing from your computer —Basic operation
5-1
Chapter
5
Printing from your
computer
—Basic operation
Before printing
Before printing, check the following:
Have you installed the MultiPASS Suite software?
If not, see the Setup Sheet or the Software Guide .
Is the machine selected as the default printer?
You can check if your machine is set as the default printer when you open the Print dialogue
box in an application and your machine is selected in the Printer box.
Follow this procedure if it is not selected:
1
On the Windows desktop, click [Start], point to [Settings], then click [Printers]
(Windows XP: Click [Start], then click [Printers and Faxes]).
2
In the Printers (Printers and Faxes) window, click the printer icon.
3
On the File menu, click [Set as Default] or [Set as Default Printer].
Is the correct print media loaded in the multi-purpose tray?
For details, see Chapter 3.
Printing
Once you have installed the MultiPASS Suite software, you can begin printing from any
Windows application that supports printing.
The procedure for printing documents varies somewhat for different Windows applications.
Below is the general printing procedure. For detailed instructions on printing from a specific
application, refer to the documentation provided with that application.
Follow this procedure to print a document:
1
With your document open in the Windows application, click the print command.
• In most applications, the print command is on the File menu or toolbar.
2
In the Print dialogue box, make sure your
machine is selected in the Printer box. If not,
select your machine from the printer name
drop-down list
q
.
3
Click the command to print your document
w
.
• This command is usually [OK] or [Print].
q
w
5
Printing from your computer —Basic operation