Canon PowerShot SXE40 HS, Getting Started

Page: 252 / 293

216
Before using an Eye-Fi card, always confirm that local use is permitted (p. 3).
Inserting a prepared Eye-Fi card enables automatic wireless transfer of
images to a computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi card. Refer to the card’s user manual or
contact the manufacturer for instructions on preparing and using cards or
resolving transfer problems.
Connection status of Eye-Fi cards in the camera can be checked on the
shooting screen (in regular information display mode) or playback screen (in
simple information display mode).
Images labeled with a icon have been transferred.
Using an Eye-Fi Card
• When using an Eye-Fi card, keep the following points in mind.
• Cards may continue to transmit radio waves even when [Eye-Fi
trans.] is set to [Disable] (p. 217). Remove the Eye-Fi card before
entering hospitals, aircraft, or other areas where transmission is
prohibited.
• When troubleshooting image transfer issues, check the card and
computer settings. For details, refer to the card’s user manual.
• Poor wireless connections may cause image transfer to take a long
time, and transfer may be interrupted in some cases.
• Eye-Fi cards may become hot, due to their transfer functions.
• Battery power will be consumed faster than in normal use.
• Camera operation may become sluggish. To resolve this, try setting
[Eye-Fi trans.] to [Disable].
(Gray) Not connected
(Blinking white) Connecting
(White) Connected
(Animated) Transfer in progress
Interrupted
Error acquiring Eye-Fi card information (Restart the camera.
Repeated display of this icon may indicate a problem with the
card.)
Still Images Movies