Canon PowerShot SXE40 HS Getting Started Download Page 90

Page: 90 / 293

For fully automatic selection at optimal settings for specific scenes, simply let
the camera determine the subject and shooting conditions.

Turn the camera on.

Press the power button.

Enter

mode.

Set the mode dial to

Aim the camera at the subject. The camera
will make a slight clicking noise as it
determines the scene.

Icons representing the scene and image
stabilization mode are displayed in the upper
right of the screen (pp. 59, 61).

Frames displayed around any detected
subjects indicate that they are in focus.

Compose the shot.

To zoom in and enlarge the subject, move the
zoom lever toward

(telephoto), and to

zoom away from the subject, move it toward

(wide angle). (A zoom bar showing the

zoom position is displayed.)

Shooting in Smart Auto Mode

Still Images

Movies

Zoom Bar

Focus Range (approx.)

Summary of Contents for PowerShot SXE40 HS






































































































































































































































































































Search results

Summary of Contents for PowerShot SXE40 HS

Reviews:

Related manuals for PowerShot SXE40 HS

Brands by name

Popular brands

Canon PowerShot SXE40 HS, Getting Started

Search results

Summary of Contents for PowerShot SXE40 HS

Reviews:

Related manuals for PowerShot SXE40 HS

Brands by name

Popular brands