Canon PowerShot SXE40 HS Getting Started Download Page 286

Page: 286 / 293

System Requirements

Windows

Operating System

Windows Vista 7 SP1

Windows Vista SP2

Windows XP SP3

Computer

Computer running one of the above operating systems (preinstalled), with an included

USB port

An Internet connection is required to use the auto update function.

CPU (Still Images)

1.6 GHz or higher

CPU (Movies)

HD (720 p), SD: Core 2 Duo 1.66 GHz or higher

Full HD (1080 p): Core 2 Duo 2.6 GHz or higher

ALL-I, IPB: Core 2 Duo 3.0 GHz or higher

RAM (Still Images)

Windows 7 (64-bit): 2 GB or more

Windows 7 (32-bit): 1 GB or more

Windows Vista (64-bit, 32-bit): 1 GB or more

Windows XP: 512 MB or more

RAM (Movies)

HD (720 p), SD: 1 GB or more

Full HD (1080 p): 2 GB or more

Interface

USB

Free Hard Disk Space

440 MB or more*

Display

1,024 x 768 resolution or higher

* In Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed. Installation may take some time,

depending on computer performance.

Macintosh

Operating System

Mac OS X 10.6

Computer

Computer running one of the above operating systems (preinstalled), with an included

USB port

An Internet connection is required to use the auto update function.

CPU (Still Images)

Core Duo 1.83 GHz or higher

CPU (Movies)

HD (720 p), SD: Core Duo 1.83 GHz or higher

Full HD (1080 p): Core 2 Duo 2.6 GHz or higher

ALL-I, IPB: Core 2 Duo 3.0 GHz or higher

RAM (Still Images)

1 GB or more

RAM (Movies)

HD (720 p), SD: 1 GB or more

Full HD (1080 p): 2 GB or more

Interface

USB

Free Hard Disk Space

550 MB or more

Display

1,024 x 768 resolution or higher

• Check the Canon website for the latest system requirements, including supported OS versions.

Unauthorized reproduction of this guide in whole or part is prohibited.

Information in this guide is subject to change without notice.

Notwithstanding the preceding items, Canon cannot be held liable for any loss arising from the use of
this software.

Summary of Contents for PowerShot SXE40 HS






































































































































































































































































































Search results

Summary of Contents for PowerShot SXE40 HS

Reviews:

Related manuals for PowerShot SXE40 HS

Brands by name

Popular brands

Canon PowerShot SXE40 HS, Getting Started

Search results

Summary of Contents for PowerShot SXE40 HS

Reviews:

Related manuals for PowerShot SXE40 HS

Brands by name

Popular brands