Canon PowerShot SXE40 HS Getting Started Download Page 126

Page: 126 / 293

Image brightness or colors when shooting can be easily customized as
follows.

Enter

mode.

Set the mode dial to

Configure the setting.

Press the

button to access the setting

screen. Press the

buttons to choose a

setting item, and then press the

buttons

or turn the

dial to adjust the value as you

watch the screen.

Press the

button.

Shoot.

Brightness/Color Customization (Live

View Control)

Still Images

Movies

Brightness

Adjust image brightness as desired. For brighter images, adjust the level
to the right, and for darker images, adjust it to the left.

Color

Adjust image color saturation as desired. For more vivid images, adjust
the level to the right, and for more subdued images, adjust it to the left.

Tone

Adjust image color tone as desired. For a warm, reddish tone, adjust the
level to the right, and for a cool, bluish tone, adjust it to the left.

Summary of Contents for PowerShot SXE40 HS






































































































































































































































































































Search results

Summary of Contents for PowerShot SXE40 HS

Reviews:

Related manuals for PowerShot SXE40 HS

Brands by name

Popular brands

Canon PowerShot SXE40 HS, Getting Started

Search results

Summary of Contents for PowerShot SXE40 HS

Reviews:

Related manuals for PowerShot SXE40 HS

Brands by name

Popular brands