Canon PowerShot SXE40 HS Getting Started Download Page 141

Page: 141 / 293

Image Effects (Creative Filters)

105

Choose the area to keep in focus.

Press the

button.

Move the zoom lever to resize the frame, and
press the

buttons to move it.

For movies, choose the movie
playback speed.

Press the

button, and then choose the

speed by pressing the

buttons or turning

the

dial.

Return to the shooting screen and
shoot.

Press the

button to return to the

shooting screen, and then shoot.

Playback Speed and Estimated Playback Time (for One-
Minute Clips)

Speed

Playback Time

Approx. 12 sec.

Approx. 6 sec.

Approx. 3 sec.

•

The zoom is not available when shooting movies. Be sure to set the
zoom before shooting.

•

To switch the orientation of the frame (from horizontal to vertical or vice-versa),
press the

button in step 2. You can move the frame in vertical orientation by

pressing the

buttons.

•

Holding the camera vertically will change the orientation of the frame.

•

Movie image quality is

at an aspect ratio of

and

at an aspect ratio of

(p. 78). These quality settings cannot be changed.

Summary of Contents for PowerShot SXE40 HS






































































































































































































































































































Search results

Summary of Contents for PowerShot SXE40 HS

Reviews:

Related manuals for PowerShot SXE40 HS

Brands by name

Popular brands

Canon PowerShot SXE40 HS, Getting Started

Search results

Summary of Contents for PowerShot SXE40 HS

Reviews:

Related manuals for PowerShot SXE40 HS

Brands by name

Popular brands