Canon PowerShot SXE40 HS Getting Started Download Page 183

Page: 183 / 293

Viewing

147

Play movies.

To start playback, press the

button,

choose

(either press the

buttons or

turn the

dial), and then press the

button again.

Adjust the volume.

Press the

buttons to adjust the volume.

Pause playback.

To pause playback, press the

button. The

movie control panel is displayed. To resume
playback, press the

buttons or turn the

dial to choose

, and then press the

button.

After the movie is finished,

displayed.

•

To switch to Shooting mode from Playback mode, press the shutter button
halfway.

•

To deactivate Scroll Display, press the

button, choose [Scroll Display]

on the

tab, and then choose [Off].

•

For playback from the last image viewed, press the

button, choose

[Resume] on the

tab, and then [Last seen].

•

To change the transition shown between images, press the

button,

choose [Transition] on the

tab, and then press the

buttons to choose the

effect.

Summary of Contents for PowerShot SXE40 HS






































































































































































































































































































Search results

Summary of Contents for PowerShot SXE40 HS

Reviews:

Related manuals for PowerShot SXE40 HS

Brands by name

Popular brands

Canon PowerShot SXE40 HS, Getting Started

Search results

Summary of Contents for PowerShot SXE40 HS

Reviews:

Related manuals for PowerShot SXE40 HS

Brands by name

Popular brands