Canon PowerShot SXE40 HS Getting Started Download Page 154

Page: 154 / 293

Image Brightness (Exposure Compensation)

118

Press the

button, choose

in the menu,

and choose the desired option (p. 39).

The option you configured is now displayed.

Evaluative

For typical shooting conditions, including backlit shots.
Automatically adjusts exposure to match the shooting conditions.

Center
Weighted Avg.

Determines the average brightness of light across the entire image
area, calculated by treating brightness in the central area as more
important.

Spot

Metering restricted to within the

(Spot AE Point frame),

displayed in the center of the screen.

Changing the ISO Speed

Automatically adjusts the ISO speed to suit the
shooting mode and conditions.

Low

High

For shooting outdoors in fair weather.

For shooting in cloudy conditions, or at
twilight.

For shooting night scenes, or in dark
rooms.

•

To view the automatically set ISO speed when the camera is set to

, press

the shutter button halfway.

•

Although choosing a lower ISO speed may reduce image graininess, there may
be a greater risk of subject blurriness in some shooting conditions.

•

Choosing a higher ISO speed will increase shutter speed, which may reduce
subject blurriness and increase the flash range. However, shots may look
grainy.

Summary of Contents for PowerShot SXE40 HS






































































































































































































































































































Search results

Summary of Contents for PowerShot SXE40 HS

Reviews:

Related manuals for PowerShot SXE40 HS

Brands by name

Popular brands

Canon PowerShot SXE40 HS, Getting Started

Search results

Summary of Contents for PowerShot SXE40 HS

Reviews:

Related manuals for PowerShot SXE40 HS

Brands by name

Popular brands