Canon PowerShot G1 X, User Manual

Page: 127 / 242

Specific Shutter Speeds and Aperture Values (M Mode)
127
Choose from the three flash levels in
D
mode.
Enter
D
mode.
z
Set the mode dial to
D
.
Configure the setting.
z
Raise the flash, press the
r
button and
immediately turn the
z
dial to choose the
flash output level, then press the
m
button.
X
Once the setting is complete,
X
is displayed.
•
D
: Manual
• Calculation of standard exposure is based on the specified metering method
(p. 94).
• You can customize camera operation so that turning the
7
dial changes shutter
speed and turning the
z
dial changes the aperture value (p. 129).
Adjusting the Flash Output
• You can also set the flash level by choosing
X
in the FUNC. menu (p. 40), or
by accessing
n
(p. 41) and choosing [Flash Output] in [Flash Control] on
the
4
tab.
• You can set the flash level in
M
or
B
mode by accessing
n
(p. 41),
choosing [Flash Control] on the
4
tab, and then setting [Flash Mode] to
[Manual].
• You can also access the [Built-in Flash Settings]
n
screen as follows
(except when an external flash (sold separately) is attached to the camera).
- Press and hold the
r
button for at least one second.
- When the flash is up, press the
r
button and immediately press the
n
button.
COP
Y