manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 114

114

7 Report

[Combined] Tab Screen

This screen shows the analysis results comparing examinations of both eyes in the 
[Macula 3D], [Glaucoma 3D] or [Disc 3D] mode, accompanied with retinal images.

Information

• 

See “[Report Settings] Tab” (see page 203) to enable the [Combined] tab.

• 

See “GUI Settings” (see page 207) to enable the [Progression] tab for the 
examination done in the [OCTA] mode.

• 

Use the RX Capture for Retinal Camera (optional product) to show retinal images.

Macula Thickness Analysis

The retinal thickness of the macula is analyzed on the basis of the captured OCT image 
of the posterior part of the retina centering on the macula in the [Macula 3D] mode. The 
analysis results are shown, for example, on maps of retinal thickness of the macula 
section, ETDRS grids, tables, graphs, and 3D layer maps of boundary surfaces.
These analysis results can be shown on the [Single], [Both Eyes], [Comparison], 
[Progression], and [Combined] tab screens.
For details on the color patterns of NDB, see “Macula Thickness Analysis/2D Tomogram 
Analysis/General Tomogram Analysis/Wide 3D Scan Analysis” (see page 153).

Information

See "Changing the Contents Displayed on a Report" (see page 212) for details on 
the "retinal thickness" area.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   114

10/26/2020   10:49:43 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands