manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 166

166

7 Report

This changes the color of the OCT image.

• 

[Gray Scale]: Shows in gray scale.

• 

[Invert]: Shows in inverted gray scale.

• 

[False Color]: Shows in color.

This changes the ratio of the OCT image.

• 

[High Resolution]: Shows the image enlarged in the 
vertical direction.

• 

[Fit]: Shows the image matched to size of image 
area.

• 

[Real Scale]: Shows in real ratio (1:1).

• 

[Default]: Shows in the same aspect ratio to the 
report screen.

[High Resolution] is enabled only in the OCT image 
screen. When returning to [Report] screen while [High 
Resolution] is selected, the ratio of the OCT image is 
changed to [Fit].

• 

3D scan: This shows the projection image. The 
OCT image is changed by dragging the OCT image 
selection line.

• 

Cross scan: This shows the SLO image. The OCT 
image is changed by clicking the B-scan line.

• 

OCTA image: This shows the OCTA image.

• 

En Face image: This shows the En Face image.

The [Report] screen reappears.

Information

Mouse Wheel Operation

The OCT image can be changed by moving the cursor to the OCT image and turning 
the mouse wheel.

Saving OCT Images

Right-click the OCT image, and select [Save As] from the menu. Specify the save 
destination, and click [Save].

Viewing Angiograms

If there is OCTA image data, right-click the OCT image to select [Angiogram] from the 
menu.

Removing Projection Artifacts

Right-click the OCT image to select [Projection Artifact Removal] from the menu.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   166

10/26/2020   10:49:58 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands