Canon OCT-A1 Operation Manual Download Page 168

Page: 168 / 276

168

7 Report

Click [OK].

The [Edit Layer] screen closes.

Analyzing a Retinal Tomogram Image

On OCT images of the retina, you can analyze the distance between two points.

Click [Tools].

The [Edit Tools] screen appears.

Click the start and end points.

The length is shown.

To analyze other locations, repeat the same operation.

Click [OK].

The [Edit Tools] screen closes and the analysis results are saved.

Editing Analysis Results for a Retinal Tomogram Image

Click [Tools].

The [Edit Tools] screen appears.

Edit analysis results.

Point the mouse cursor to an end of an analysis line and drag it after the cursor is
changed to a cross.
To edit others, repeat the same operation.

Click [OK].

The [Edit Tools] screen closes.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb 168

10/26/2020 10:49:58 AM

Summary of Contents for OCT-A1





















































































































































































































































































Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands

Canon OCT-A1, Operation Manual

Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands