Canon OCT-A1 Operation Manual Download Page 145

Page: 145 / 276

7 Report

145

4. Brightness adjustment slider ([Volume], [Cross-Section] view only)

The brightness of 3D tomogram images can be adjusted. Click [Reset] to return to its
initial state.

5. Contrast adjustment slider ([Volume], [Cross-Section] view only)

The contrast of 3D tomogram images can be adjusted. Click [Reset] to return to its initial
state.

6. Selection of layer that is shown

•

[Visible]: Shows selected layers in the 3D tomogram image.

•

[Peeling]: Controls selected layers by using the peeling control bar. The position of the
layer is maintained when this is deselected.

•

[Select All]: Clicking this item selects all layers.

Information

The [Anterior 3D] mode is not supported.

7. Selection of 3D projection method ([Volume] view only)

•

[VR]: Volume Ray Casting

•

[MIP]: Maximum Intensity Projection

8. Frame

This is the boundary of the 3D tomogram image.

Information

Switching Frame Show/Hide

Right-click the 3D tomogram image, and select [Frame] from the menu.

9. Peeling control bars

The view of the tomogram image corresponding to the position on the bars changes by
altering the length and position of the bars.

Information

Switching Peeling Control Bar Show/Hide

Right-click the 3D tomogram image, and select [Peeling Control] from the menu.

10. Orientation

Shows the orientation or view direction of the 3D tomogram image.

Information

Switching Orientation Show/Hide

Right-click the 3D tomogram image, and select [Orientation] from the menu.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb 145

10/26/2020 10:49:51 AM

Summary of Contents for OCT-A1





















































































































































































































































































Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands

Canon OCT-A1, Operation Manual

Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands