manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 232

232

8 Settings

2)  Select a privilege level.

• 

[Administrator]: The user that has privilege over all functions, including initial 
settings

• 

[Super User]: The user that has privilege over all functions, except initial settings

• 

[Standard User]: The user with the [Super User] privilege with the exception of 
deleting patient information, examinations, and images, transferring examination 
data, and editing patient information and examinations

Information

For details on acceptable characters of each item, see “Acceptable Characters” (see 
page 261).

3 

Click [OK].

The [User Management] screen reappears. The added user appears.

Changing the User Information

1 

Select a user, and then click [Edit].

The [User properties] screen appears.

Information

To delete a user

Select a user, and then click [Delete].

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   232

10/26/2020   10:50:08 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands