Canon OCT-A1 Operation Manual Download Page 101

Page: 101 / 276

6 Capturing Images

101

Adjusting the Brightness and Contrast of Captured

Images

Move the cursor over the OCT image and drag the cursor up, down, right, or left.

•

Dragging up and down: Adjusts the brightness.

•

Dragging right and left: Adjusts the contrast.

B: Brightness

C: Contrast

Information

Resetting Brightness and Contrast After Adjustment

Right-click the OCT image, and select [Reset Brightness/Contrast] from the menu.

Changing the Color of Captured Images

Right-click the OCT image, and select the item from the menu.

•

[Gray Scale]: Show in gray scale (default)

•

[Invert]: Show in inverted gray scale

•

[False Color]: Show in color

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb 101

10/26/2020 10:49:41 AM

Summary of Contents for OCT-A1





















































































































































































































































































Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands

Canon OCT-A1, Operation Manual

Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands