manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 177

7 Report

177

This selects the density to be analyzed from 
[Area Density] or [Skeleton Density].
The transparency of the En Face image can 
be changed by operating the overlay slider.
This selects a method for projecting the 
OCTA image.

• 

[AIP]: Average Intensity Projection

• 

[MIP]: Maximum Intensity Projection

This selects whether to apply the projection 
artifact removal function.
This adjusts the brightness/contrast of the 
OCTA image.
Clicking [Reset] returns brightness/contrast 
to its initial state.
This selects the boundaries of the OCTA 
image.
This shows the B-scan tomogram image.
Double-clicking the B-scan tomogram image 
switches the screen to “Enlarging the OCT 
Image” (see page 165).
If you double-click the image again, the 
B-scan tomogram image reappears.

The [Report] screen reappears.

Information

Mouse Wheel Operation

When you move the cursor to the B-scan tomogram image and turn the mouse 
wheel, the B-scan line position of the OCTA image changes and the tomogram image 
appears.

Saving OCTA Images

Right-click the OCTA image, and select [Save As] from the menu. Specify the save 
destination, and click [Save].

Saving Binary Images

Right-click the OCTA image, and select [Save Binary Image] from the menu. Select 
[Save as Binary Image] to save a binary image or select [Save as Skeleton Image] to 
save a skeleton image. Specify the save destination, and click [Save].

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   177

10/26/2020   10:50:00 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands