Canon OCT-A1 Operation Manual Download Page 160

Page: 160 / 276

160

7 Report

Changing the Color

Right-click the OCT image, and select an item from the menu.

•

[Gray Scale]: Shows in gray scale (default).

•

[Invert]: Shows in inverted gray scale.

•

[False Color]: Shows in color.

Changing the View of Boundaries

Right-click the OCT image, and select the item from the menu.
The content displayed differs depending on the view mode.

When the view mode is [Single], [Both Eyes], [Comparison], or [Progression]:

•

[Full Retinal]: ILM, RPE/Choroid, BM

•

[Full R IS/OS]: ILM, IS/OS, RPE/Choroid, BM

•

[Full R INL/OPL]: ILM, INL/OPL, RPE/Choroid, BM

•

[ILM + IPL/INL]: ILM, IPL/INL

•

[None]: Boundaries are hidden (default).

When the view mode is [General] or [OCTA]:

•

[Reset Boundaries]: Resets the positions of the boundaries.

•

[Synchronize Boundaries]: Synchronizes the positions of two boundaries.

•

[Angiogram]: Overlays Angiogram ([OCTA]).

Changing the Ratio

Right-click the OCT image, and select the item from the menu.

•

[Fit]: Shows the image matched to size of image area (default).

•

[Real Scale]: Shows in real ratio (1:1).

Using the Mouse Wheel to Change the OCT Image View

The image that is shown can be changed by moving the cursor to the OCT image and
turning the mouse wheel.

In view modes in which two or more OCT images are shown, frame feeding of images
using the mouse wheel can be synchronized. Right-click the OCT image, and select
[Synchronize] from the menu.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb 160

10/26/2020 10:49:57 AM

Summary of Contents for OCT-A1





















































































































































































































































































Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands

Canon OCT-A1, Operation Manual

Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands