manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 236

236

8 Settings

Storage Management

On the [Storage Management] screen, perform the settings of the hard disk drive (HDD) 
to be used by the database. When two or more drives are displayed in the list, the drive 
displayed at the top of the list has the highest priority. 
The drive whose [Current] is selected is the current drive. The data is stored in the 
current drive first. When there is no more free space on the current drive, the highest 
priority drive is used. When you select [Local] on [Database], [Storage Management] can 
be set. You can set network storage as the current drive.

Adding a Drive

Select a drive from the list box, and then click [Add]. The selected drive appears at the 
bottom of the list.

Important

The drive to be added requires free space greater than 100 GB.

Changing the Current Drive

Select [Current] of the drive to be set as a current drive.

Changing the Priority of Drive

Select a drive from the list, and then click 

 or 

. The priority of drive is changed.

Deleting a Drive

Select a drive from the list, and then click [Delete]. The drive in which data has already 
been stored cannot be deleted.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   236

10/26/2020   10:50:09 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands