manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 115

7 Report

115

[Single] Tab Screen

1

2

3

4

5

7

6

8

9

1.   SLO image

You can select the image to overlay from the list box.

• 

[Full Retinal Thickness]: Retinal thickness map

• 

[Projection Image]: Projection image

• 

[SLO Image]: Image overlay disabled

2.   ETDRS grid

This corresponds to the grid overlaid on the SLO image: the retinal thickness of each 
sector appears. Background colors are color-coded on the basis of the normative 
database.

3.   Full Retinal Measurement table*

This table shows the minimum retinal thickness inside the minimum circle ( 1 mm) on 
the ETDRS grid, the average retinal thickness and retinal volume inside the maximum 
circle ( 6 mm). Background colors are color-coded on the basis of the normative 
database.
*  The area to calculate average retinal thickness and retinal volume has been modified 

from the scanning area (10 x 10 mm) to the inside of the ETDRS grid since the version 
3.0.

4.   Retinal thickness trend graph*

This plots all examinations performed for the same patient to show changes in the 
retinal thickness over time. The selected examination is indicated in blue, and other 
examinations are indicated in black. Background colors are color-coded on the basis of 
the normative database.
You can select what is shown from the list box.

• 

[Central Sector Thickness]: Thickness inside the minimum circle ( 1 mm) on the 
ETDRS grid

• 

[Minimum Fovea Thickness]: Minimum retinal thickness inside the minimum circle 
( 1 mm) on the ETDRS grid

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   115

10/26/2020   10:49:43 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands