manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 137

7 Report

137

[Comparison] Tab Screen

The following describes the elements that are different from those of the [Single] tab 
screen. The other elements are the same as those of the [Single] tab screen.

2

1

1.   Background color list box

Background color displayed in the thickness profile can be selected from the list box.

• 

[Difference]: Shows thickness differences of both examinations.

• 

[Normative DB]: Shows background colors based on the normative database.

2.   Thickness difference of both examinations

The parts which have differences in thickness are shown in colors.

[Progression] Tab Screen

The elements of the [Progression] tab screen are the same as those on the [Comparison] 
tab screen.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   137

10/26/2020   10:49:50 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands